NAD C 3030S

STEREO INTEGRATED AMPLIFIER
The NAD C 3030S Integrated Amplifier combines vintage-inspired design with the power of BluOS streaming. Signature details such as illuminated VU meters and cursive NAD branding reference NAD’s early amplifiers, whilst BluOS built in enables seamless access to music through the BluOS Controller app. With 50 watts per channel of NAD amplification, the C 3030S delivers clear, composed sound across a wide range of listening levels. HDMI eARC and a built-in phono input allow it to integrate naturally into modern music and TV-based systems.

KEY FEATURES

BluOS built-in streaming for access to music services and multi-room playback via the
BluOS Controller app
50 watts per channel of NAD amplification
Vintage-inspired design with VU meters and cursive NAD branding
HDMI eARC input for straightforward TV integration
Moving Magnet phono input for vinyl playback
Bluetooth for wireless music playback
Optical and line-level analogue inputs for additional sources
Bass-managed subwoofer output with optional fixed 80 Hz high-pass filter
Front-panel headphone output for private listening
Supplied remote control for everyday operation

PREAMPLIFIER SECTION

LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20 Hz – 20 kHz) 90 dB (IHF, A-weighted, 500 mV out, unity gain)
Input impedance (R and C) 28 kohms + 360 pF
Maximum input signal >5.7 Vrms (0.1 % THD)
Output impedance 345 ohms
Input sensitivity 100 mV (500 mV out, Volume maximum)
Frequency response 20 Hz – 20 kHz (±0.3 dB)
Maximum voltage output >5 V (0.1 % THD)

LINE IN, HEADPHONE OUT
THD (20 Hz – 20 kHz) 90 dB (32 ohms load, A-weighted, 1V out, unity gain)
Frequency response 20 Hz – 20 kHz (±0.3 dB)
Channel separation >60 dB at 1 kHz
Output impedance 22 ohms

GENERAL SPECIFICATIONS

LINE IN, SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms 50 W (20 Hz – 20 kHz at rated THD, both channels driven)
THD (20 Hz – 20 kHz) 90 dB (A-weighted, 500 mV input, 1 W out in 8 ohms)
Clipping power >70 W (1 kHz 0.1 % THD, 4 ohms)
>55 W (1 kHz 0.1 % THD, 8 ohms)
IHF dynamic power 8 ohms: 120 W
4 ohms: 250 W
2 ohms: 390 W
Peak output current >16 A (1 ohm, 1 ms)
Damping factor >52 (20 Hz to 6.5 kHz, 50 W, 8 ohms)
Frequency response 20 Hz – 20 kHz (±0.3 dB)
Channel separation >75 dB (1 kHz)
>70 dB (10 kHz)
Input sensitivity (50 W in 8 ohms) 750 mV
Frequency band 2.402 G – 2.480 G
Maximum transmit power 7 dBm ± 2 dBm
Power consumption, standby mode* 0.5 W

LINE IN, PHONO INPUT
THD (20 Hz – 20 kHz) 82 dB (10 mV in, A-weighted, 1 W out)
Input impedance (R and C) 46 kohms / 100 pF
Input sensitivity 1.6 mV (20 Hz – 50 W out, Volume maximum)
Frequency response 20 Hz – 20 kHz (±0.3 dB)
>16 A (1 ohm, 1 ms)
Note: The RIAA response is consistent with a pre-emphasis that is rolled off at 50 kHz by a second order filter, such as used in Neumann cutting lathes.
Maximum input signal at 1 kHz >15 mVrms (0.1 % THD)

DIMENSION AND WEIGHT
Gross dimensions (W x H x D) ** 356 x 129 x 329 mm
14 1/8 x 5 1/8 x 13 inches
Net weight 5.8 kg (12.8 lbs)
Shipping weight 7.2 kg (15.9 lbs)

BluOS SPECIFICATIONS

BluOS AUDIO
Supported audio file format MP3, AAC, WMA, OGG, WMA-L, ALAC, OPUS
Supported high-resolution audio file format FLAC, MQA, WAV, AIFF
Sampling rate up to 192 kHz
Bit depths 16 – 24